logo
Garmat
colmet
ma
compress
transair
cewg
filters
photo

contact

gar logo


Garmat USA Products


3000 Series

 

A smaller booth foot print means you'll gain valuable square footage in your body shop. Ten foot wide vehicle entrance doors, interior accessible 4 tube light fixtures and a 27' cabin, are just a few of the many features of thenew 3000 Series. All Garmat® USA products are ETL Listed.

Back to Top


The Zephyr


An economically priced paint booth from Garmat USA, the Zephyr gives you the reliability and the performance you have been looking for in an economical package that fits most budgets.

Back to Top


Welcome to the New Frontier in Painting Technology!



The Frontier - No Pit Required - Save Valuable Shop Floor Space!
The Frontier™ is a technological break through in that it has the most advanced air flow of any booth on the market today. It is a self contained pit-less downdraft spray booth which makes efficient use of your body shop floor space as it minimizes the amount of square footage required for the spray booth - the mechanical unit is built right into the plenum of the booth! There are two models available, both of which are fully insulated; the Standard Model, which includes Intake and Exhaust Motors and does not contain heated make-up air and the Deluxe Model, which includes, Intake and Exhaust Motors and contains heated make-up air.

Back to Top


Tier I

 

 

The Tier I is the Entry level version of the Frontier. It is a single wall panel constructed spray booth that is available in three different versions:

Exhaust Only, which draws in shop air through ceiling filters and exhausts it to the outside Intake and Exhaust in which fresh air is drawn through ceiling filters and exhausted to the outside Intake and Exhaust with Heat, in which outside air is heated and forced through ceiling filters, and exhausted to the outside.

Back to Top


The CTOF

 

The Garmat® USA preparation area became the first of its kind to be listed as a Closed Top Open Front Spray Booth. The CTOF meets all NFPA 33 Code Requirements governing CTOF spray booth application equipment. This equipment utilizes the same technology that gives spray booths their aggressive air flow and performance.



Back to Top



Accele-Cure by Garmat USA

accel

Sometimes the best solution is the simplest- the brilliance of Garmat® USA’s Accele-Cure™ Accelerated Drying System. Accele-Cure™ is Garmat® USA's patentedsolution to the flashing of Waterborne paints. This type of paint needs a higher velocity airflow to "accelerate" the drying process. Accele-Cure™ utilizes aluminum blade propeller fans, which are designed to focus more air flow at a faster velocity directly over the vehicle. By breaking the micro climate around the paint surface, the water is evaporated far quicker, thus accelerating the evaporation process. This ultimately results in a substantially quicker flash time. Testing has proven that Accele-Cure™ flashes paint far quicker for both Waterborne and Solvent type paints.

Used during the "dry" cycle, the Accele-Cure™ system draws air towards the center of the booth and accelerates the air delivered from the plenum, which concentrates air movement over the vehicle for more efficient flashing of the paint.

Back to Top



Paint Mixing Rooms


Garmat® USA Paint Mixing Rooms are designed to provide a well illuminated, clean ventilated work area for mixing applications. These units utilize a positive pressure environment to help eliminate contaminated shop air from interfering from the mixing process. The Paint Mixing Room is a key element when considering your paint shop requirements. We offer several standard models as well as custom models to meet the needs that are specific to your body shop.

Back to Top




Visa and Mastercard Accepted

links


Home | Garmat USA | Colmet | Bananza | Compressors | Eurovac | Transair
CEG | Accessories | Filters & Service| Photo Gallery | Company History | Contact Us

Top